Directions for use:

Remove filter cartridge(s)

With spa water temperature at 35ºC (95ºF) or higher and circulation running, add entire contents of bottle to spa water.

Run jets for a minimum of 5 minutes. Note: If foaming becomes excessive, turn jets off. Some foaming is expected during the purge process.

Maintain water temperature at 35ºC+ (95ºF+) and allow spa to circulate overnight with jets off.

Drain and rinse/clean out the surfaces of the spa. Refill the spa water and reinstall the filter elements.

Proceed with normal spa maintenance.

Check Availability At

Pincode field should not be empty!


Spa Purge attacks the root cause of most spa maintenance problems, the build-up of organic waste contamination! Organic contaminants like oils, lotions, cosmetics, hair products and sweat build-up in spa water produces scum lines, cloudiness, clogged filters, bad odors and foaming. These contaminants collect and build-up in your spa, circulation system, and filter. By purging the spa of this organic build-up, the symptoms of contamination will be reduced or eliminated. Spa Purge contains SMARTZyme technology.

SMARTZyme technology wastes no time breaking down organic materials. A small amount of Natural Chemistry’s enzymes can treat large amounts of water due to their ability to bind to organic contaminants and reduce them to smaller and smaller parts, breaking them down to their original components such as carbon dioxide and water.

Removes organic waste deposits from all spa plumbing
Highly concentrated formula
Non-toxic and environmentally friendly
Restores plumbing to original condition
Attacks the root cause of maintenance problems caused by organic contamination

Size: 1L


There are no reviews yet.

Be the first to review “SPA PURGE 1L”

Your email address will not be published. Required fields are marked *

Your Cart
Skip to content